Axis Communications Q6042-E manual Errata, Valid for AXIS Q6044-E/Q6045-E, About this document

Models: Q6045-E

1 24
Download 24 pages 14.82 Kb
Page 21
Image 21
Errata

Errata

Valid for AXIS Q6044-E/Q6045-E

About this document

This document is a correction of AXIS Q60-E Series Installation Guide AXIS Q6042-E/Q6044-E/Q6045-E.

page 2

Regulatory Information

USA

This equipment has been tested using an unshielded network cable (UTP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. This equipment has also been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

page 13

Network Connector

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Regulatory Information.

page 14

Install the Hardware

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoors or in demanding electrical environments shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about

regulatory requirements, see Regulatory Information.

Errata, Installation Guide

Date: October 2014

AXIS Q60-E Series

Part No: 60298

© Axis Communications AB,

Part No (original document):

2014

58978

Page 21
Image 21
Axis Communications Q6042-E manual Errata, Valid for AXIS Q6044-E/Q6045-E, About this document, Regulatory Information