Axis Communications T90B30 IR-LED, T90B35 W-LED, T90B40 IR-LED Technical Specifications, Models

AXIS T90B Series

•Remote Control (optional accessory)

-Press the STATUS button to check the status of the remote control, see LED Status Indicators.

-Programming may be disabled. Turn the illuminator power off for at least 10 seconds and then turn the power on to enter Programming Mode.

-In bright sunlight conditions, the distance between

the remote control and the illuminator may need to be reduced.

- Check the battery on the remote control (CR2025), replace if necessary.

-Make sure no other strong Infra-Red source is pointing at the remote receiver.

-Make sure there is a clear line of site between the illuminator and the remote control.

-Check the remote control battery.

Technical Specifications

Models	AXIS T90B15 W-LED
	AXIS T90B25 W-LED
	AXIS T90B35 W-LED
	AXIS T90B20 IR-LED
	AXIS T90B30 IR-LED
	AXIS T90B40 IR-LED
Supported cameras	IR-LED: All Axis cameras with IR cut filter
	W-LED: All Axis network cameras

29