Caution:
Do not bend or twist the supply hoses!
Installation
Flush the hot and cold supplies thoroughly before installing this faucet. Damage to the cartridges due to debris is not covered by the Hansgrohe limited lifetime warranty.
Place the faucet and the sealing washer in position on the basin / bidet.
Slip the slide washer, metal washer and collar nut over the threaded base and tighten the collar nut by hand.
sealing washer
slide washer
metal washer
collar nut tensioning screws
Tighten the tensioning screws.
Connect the supply hoses to the stops with 3/8“ compression fittings (not included).
Install the
Turn on the water and check all connections for leaks.
4