Axor Raindance Imperial Basic Set 28412181 Raindance Imperial Showerhead, Package contents

Models: 28412181 28403001

1 28
Download 28 pages 53.12 Kb
Page 5
Image 5
Raindance Imperial Basic Set 28412181 Raindance Imperial Showerhead 28403001

Raindance Imperial Basic Set 28412181 Raindance Imperial Showerhead 28403001

Technical Specifications

Spray modes

 

Rain AIR XXL

2.5 gpm max.

Rain AIR

2.5 gpm max.

Whirl AIR

2.5 gpm max.

Recommended incoming water pressure

45 - 72 psi

Maximum water pressure

145 psi

Recommended max. output temperature

110° - 112° F*

Safety stop (on thermostatic mixing valve)

100° F.

*Know and follow all applicable local plumbing codes when setting the maximum output temperature on the shower valve. In Massachusetts, the maximum output temperature of the shower valve may be no higher than 112° F.

Required tools (not included)

waterproof sealant

marking pencil

wrenches – 13 mm / 22 mm / 24 mm

drill bits – 6 mm / 10 mm

Philips screwdriver

Allen (hex) wrenches – 6 mm / 3 mm / 5 mm

box cutter

28412181 Package contents

M 8x100

4.5x90

4.5x50

Installation Considerations

This unit should be installed with ¾" Ecostat Themostatic mixing valve rough 15374181 with EcoMax™ trim, ¾" volume control rough 13975181 and Quattro diverter rough 13932181. Trim kits are specified and sold sepa- rately. Rough valves and trims are not included with the Raindance Imperial.

Additional features, such as a handshower and/or bodysprays, may be added, however, additional volume controls are required.

The Raindance Imperial basic set must be installed in the ceiling prior to the installation of the finishing material (tile, marble, etc.).

Install the thermostatic mixer, volume control(s) and Quattro diverter according to the installation instructions. Run three ½" lines from outlet ports on the Quattro diverter to supply the Raindance Imperial. At the ends of the lines, attach ½" straight connectors, which will connect to the supply lines on the Raindance Imperial basic set.

Make sure that sufficient drain capacity is provided.

The screws and anchors provided are suitable for use in con- crete. The installer must provide alternate fasteners for use in other mounting surfaces.

The 28403001 showerhead weighs approximately 25 lbs. Do not attempt to install it alone. A helper is necessary.

Page 5
Image 5
Axor Raindance Imperial Basic Set 28412181 Raindance Imperial Showerhead, Technical Specifications, Package contents