Axor 284466XX1 Specification, Required tools, Bodyspray Placement, Pressure Balancing Loop

Bodyvette Bodyspray 28466XX1

Installation

Specification

Flow rate @ 45 psi 2.0 gpm

Required tools

Adjustable wrench

Teflon tape

Waterproof bathroom sealant

Bodyspray Placement

Custom showers are sized to the user(s). Bodysprays are normally placed at the upper back, middle back, and upper thigh. Always position bodysprays according to the preferences of the user(s).

Pressure Balancing Loop

If installing bodysprays in a bank of 3 or fewer, a pressure balancing loop is not necessary.

If installing bodysprays in a bank of four or more, a pressure balancing loop must be used to keep the pressure even between the bodysprays.

Rough-in Suggestion

This installation requires a 1/2” male threaded pipe fitting recessed 3/8” behind the surface of the finished wall. The plumber should install a properly anchored 1/2” female pipe fitting (i.e. a drop-ear ell) recessed into the wall, into which a brass pipe nipple of proper length can be fitted once the finished wall is complete.