Installation Instructions
•Sit the faucet with black sealing ring in the faucet hole on top of the mounting surface.
•From beneath, install the friction washer, metal washer, and mounting nut. Tighten the mounting nut, taking care not to overtighten.
•Check the position of the faucet. When satisfied, use a
•Feed the pull rod through the hole in the back of the faucet body.
•Attach the supply lines to the supply stops with standard 3/8" compression fittings (not included)
sealing ring
friction washer
metal washer mounting nut
tensioning screws
3
