Microphone Suggestions
In addition to the attached
Regulation
CE Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of Directives 89/336/EC or 73/23/EC.
Before putting the equipment into operation, please observe the respective
FCC Rules
This equipment has been tested and found to comply with the limits for of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1)Reorient or relocate the receiving antenna.
2)Increase the separation between the equipment and receiver.
3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4)Consult the dealer or an experienced radio/TV technician for help. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly
Maintenance and Care
Do not attempt to service this unit yourself as opening or removing covers may expose dangerous voltage or otherhazards. Refer all servicing to qualified service personnel.
Clean only with a dry cloth. Do not use detergents or other liquids. Replacement parts
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety check
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
Handling Care for Ni-MH battery
1To prevent the battery break, carefully ready this manual.
2The operation environment of battery is －20℃～＋60℃. If the operation temperature is out of this range, the battery may damage.
3Don't leave the battery inside of car under direct sunshine, don't face the battery for direct sunshine and don't keep the battery beside heater. Also, don't use the batter at very cold place, which is zero degree or less than zero.
Such environment may make short life and damage goods.
4Don't put the battery in the slot water and watery.
5Inside of battery, it includes the alkaline liquid. If the liquid touches to hands, skin etc., immediately washes them.
Prohibition:
Don't throw away the battery in the fire and don't make warm it.
Don't soldering it directly.
Minus and plus terminal, don't connect by needle, cable etc
Don't set the battery + - terminal in reverse.
Don't disassemble and assembly.
Don't throw away and put high pressure on it.
Recharging user only our accepted recharge.
Don't insert battery into car external battery socket, wall socket.
Don't user any other equipment without our permission.
14 | 3 |
