![](/images/new-backgrounds/1202873/20287313x1.webp)
The Model 1140 has two sets of eight switches, yielding 16 total DIP switches. The three sets will be referred to as S1 and S2. As Figure 2 shows, the orientation of all DIP switches is the same with respect to "ON" and "OFF" positions.
Figure 2. Close-up of DIP switches showing “ON” and “OFF” positions
3.2 CONFIGURATION SWITCH SET "S1"
The DIP switches on S1 set data rate, clock source, async./sync. mode and carrier control method. The default settings are summarized in the table below.
Figure 3. Summary of DIP switch default settings for set S1
Documentation Number 11401198 Manual | 5 |
B&B Electronics
PH (815)