5: Commands and Levels

 

 

 

CLI session.

write

Stores the current configuration in permanent memory.

lpd 1 (config-lpd:1) level commands

 

banner disable

Disables printing banner for all print jobs. Only print the

 

banner when a

 

job requests it.

banner enable

Enables printing banner for all print jobs.

binary disable

Treats print job as ascii text. Filters out all non-ascii cha-

 

racters and

 

certain control characters.

binary enable

Treats print job as binary. Sends data byte-for-byte to the

 

printer.

capture disable

Redirects serial output back to the line.

capture enable

Redirects serial output from the line to this CLI session.

clrscrn

Clears the screen.

convert newline disable

Disables converting single new line and carriage return

 

characters to

 

DOS-style line endings.

convert newline enable

Enables converting single new line and carriage return

 

characters to

 

DOS-style line endings. If characters are already in DOS

 

line-ending order,

 

they are not converted.

eoj disable

Disables sending the end-of-job string after each print job.

eoj enable

Enables sending the end-of-job string after each print job.

eoj text binary <binary>

Sets the end-of-job text allowing for binary characters.

 

<binary> = string in binary format that will be sent to the

 

printer at the

 

end of each print job.

 

Within [] use binary decimal up to 255 or hex up to 0xFF.

eoj text set <text>

Sets the end-of-job text.

 

<text> = ascii string that will be sent to the printer at the

 

end of each

 

print job.

exit

Exits to the configuration level.

formfeed disable

Disables the printer from advancing to the next page at the

 

end of each

 

print job.

formfeed enable

Forces the printer to advance to the next page at the end

 

of each print job.

kill

Ends the current print job on this lpd line.

line <line>

Enters the line level.

 

<line> = number of the line (serial port) to be configured.

lpd <line>

Enters the configure lpd level.

 

<line> = number of the line (lpd serial port) to be confi-

 

gured.

no eoj text

Removes the end-of-job string.

no queue name

Removes the queue name.

no soj text

Removes the start-of-job string.

ppp <line>

Enters the serial line PPP level.

queue name <text>

Sets the name of the queue that this lpd line belongs to.

 

<text> = name for the queue.

XPort Pro Command Reference

105

Page 105
Image 105
Lantronix 900-558 manual Lpd 1 config-lpd1 level commands, Line line