Lantronix 900-558 manual Dns dns level commands, Email 1 email1 level commands

	5: Commands and Levels
modem control disable	Does not watch the modem control pin to disconnect.
modem control enable	Watches the modem control pin and disconnects if it is not
	asserted.
no stop character	Removes the stop character.
no timeout	Disables disconnect after timeout feature for tunneling
	sessions.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
stop character <control>	Sets the stop character.
	The character may be input as text, control, decimal, or
	hex.
	A control character has the form <control>C.
	A decimal value character has the form \99.
	A hex value character has the form 0xFF.
timeout <milliseconds>	Disconnects when no data has been received on the line
	(serial port) for the
	specified length of time.
	<milliseconds> = timeout in milliseconds.
write	Stores the current configuration in permanent memory.
dns (dns) level commands
clrscrn	Clears the screen.
exit	Exits to the enable level.
lookup <host_or_ip>	Return a lookup on the DNS name or IP address.
remove all	Removes all entries from the DNS Cache.
remove host <host>	Removes an entry from the DNS Cache.
show	Show DNS status and cache entries.
show history	Displays the last 20 commands entered during the current
	CLI session.
write	Stores the current configuration in permanent memory.
email 1 (email:1) level commands
auto show statistics	Continuously displays email statistics.
cc <text>	Sets Cc addresses for email alerts.
	<text> = a quoted, semicolon separated list of email ad-
	dresses.
clear log	Clears all entries from the mail log.
clear mail counters	Sets the email counters to zero.
clrscrn	Clears the screen.
cp	Enters the next lower level.
default local port	Sets the local port (used to send email alerts) to random.
default priority	Sets X-Priority for email alerts to 3 (normal).
default server port	Restores the factory default port for SMTP on the server
	side.
email <number>	Enters the configure email level.
exit	Exits to the enable level.
from <text>	Sets the From address for email alerts.
	<text> = email address to place in the From field of the
	email alert.
local port <number>	Sets the local port used to send email alerts.
	<number> local port to use for email alerts.
message file <text>	Specifies a text file, the contents of which will be the mes-

XPort Pro Command Reference 59