Lantronix 900-558 manual If 1 config-ifeth0 level commands, Ip address ip address/cidr, Mtu bytes

	5: Commands and Levels
show history	Displays the last 20 commands entered during the current
	CLI session.
show statistics	Shows ICMP statistics
state disable	Prevents ICMP packets from being sent or received.
state enable	Allows ICMP packets to be sent and received.
write	Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
bootp disable	Disables BOOTP.
bootp enable	Enables BOOTP.
clrscrn	Clears the screen.
default gateway <ip address>	Sets the configurable gateway IP address to the default
	value.
default mtu	Restores the default Maximum Transmission Unit (MTU)
	size.
dhcp client id binary <binary>	Sets the client id allowing binary characters.
	Within [] use binary decimal up to 255 or hex up to 0xFF.
dhcp client id set <text>	Sets the client id in text format.
dhcp disable	Disables DHCP.
dhcp enable	Enables DHCP.
dhcp renew	Force DHCP to renew
domain <text>	Sets the domain name.
	<text> = name of the domain.
exit	Exits to the config level.
hostname <text>	Sets the host name.
	<text> = name of the host.
ip address <ip address/cidr>	Sets the IP address and network mask.
	Formats accepted:
	192.168.1.1 (default mask)
	192.168.1.1/24 (CIDR)
	"192.168.1.1 255.255.255.0" (explicit mask)
link	Enter link configuration level
mtu <bytes>	Sets the Maximum Transmission Unit (MTU) size.
no default gateway	Clears the default gateway.
no dhcp client id	Clears the DHCP client ID.
no domain	Clears the domain name.
no hostname	Clears the host name.
no ip address	Clears the IP address.
no primary dns	Clears the name of the primary DNS server.
no secondary dns	Clears the name of the secondary DNS server.
primary dns <ip address>	Sets the IP address of the primary DNS server.
secondary dns <ip address>	Sets the IP address of the secondary DNS server.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show status	Show interface status
write	Stores the current configuration in permanent memory.
ip (config-ip) level commands
auto show statistics	Continuously shows IP statistics
clear counters	Zeros counters

XPort Pro Command Reference 100