3: Command Line InterfaceXPort Pro Command Reference 13
Figure 3-2 Login Level Commands
>?
clrscrn enable
exit ping <host>
ping <host> <count> ping <host> <count> <timeout>
show show xport_pro
show history trace route <host>
>
To configure the XPort Pro, you must be in the enable level and any of its sub-levels. Figure 3-3 shows the enable level commands.
Figure 3-3 Enable Level Commands
>enable
(enable)#?
auto show interfaces auto show processes
clear interfaces counters clrscrn
configure connect
connect line <line> cpm
device disable
dns email <number>
exit filesystem
kill ssh <session> kill telnet <session>
line <line> lpd
no clear interfaces counters ping <host>
ping <host> <count> ping <host> <count> <timeout>
ppp <line> reload
reload factory defaults show
show history show interfaces
show ip sockets show processes
show sessions show xport_pro
ssh ssh <optClientUsername> <host>
ssh <optClientUsername> <host> <port> ssl
telnet <host> telnet <host> <port>
trace route <host> tunnel <line>
write xml
See the Chapter 5: Commands and Levels at the end of this document for a complete list of levels, commands, and descriptions.