| 5: Commands and Levels |
|
|
no aes decrypt key | Removes the connect tunnel AES decrypt key. |
no aes encrypt key | Removes the connect tunnel AES encrypt key. |
no port | Removes the remote port used to establish tunnel connec- |
| tions. |
no ssh username | Removes the SSH user name. |
no tcp keep alive | Disables the connect mode TCP keep alive timeout. |
no vip name | Removes the VIP name. |
port <number> | Sets the remote port to use for connect mode tunneling. |
| <number> = number of the port to use. |
protocol ssh | Uses SSH protocol for connect mode tunneling. |
protocol ssl | Uses SSL protocol for connect mode tunneling. |
protocol tcp | Uses TCP protocol for connect mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for connect mode |
| tunneling. |
protocol telnet | Uses Telnet protocol (with IAC) for connect mode tunne- |
| ling. |
protocol udp | Uses UDP protocol for connect mode tunneling. |
protocol udp aes | Uses UDP protocol with AES encryption for connect mode |
| tunneling. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show statistics | show connection statistics |
ssh username <text> | Sets the SSH user name for use when establishing tunne- |
| ling connections |
| with other devices. |
| <text> = SSH user name. |
tcp keep alive <milliseconds> | Enables TCP keep alive for connect mode tunneling and |
| sets the timer. |
| <milliseconds> = timer value, in milliseconds. |
validate certificate disable | Skips verification of the server certificate when connecting. |
validate certificate enable | Requires verification of the server certificate when con- |
| necting. |
vip disable | Makes connections using the specified Address. |
vip enable | Makes connections using the VIP name. |
vip name <text> | Sets the VIP name. |
write | Stores the current configuration in permanent memory. |
host 15 |
|
clrscrn | Clears the screen. |
default protocol | Restores the default value of the protocol (Telnet). |
default remote port | Sets the remote port (used to connect to the host) to the |
| default value, |
| which depends on the selected protocol. |
exit | Exits to the configuration level. |
host <number> | Change to config host level |
name <text> | Sets the name of the host. |
| <text> = name of the host. |
no name | Clears the name of the host. |
no remote address | Clears the remote address of the host. |
no ssh username | Clears the SSH username associated with the host. |
XPort Pro Command Reference | 79 |