Emerson MITX-430, MITX-440-DVI-2E manual S5 RTC Wake Setting, CPU Configuration

Operation

Table 5-6 Trusted Computing (continued)

Field	Description
No TPM Hardware	If no TPM is found.
TPM Enabled Status	Show TPM status, Enabled or Disabled
TPM Active Status	Show current state of the TPM, Activated or Deactivated.
TPM Owner Status	Show current TPM Ownership state, Owned or UnOwned.

Table 5-7 S5 RTC Wake Setting

Field	Description
Wake system with Fixed	Enable or disable system wake on alarm event. When enabled, system
time	wakes on the specified hr::min::sec.
	Default value is Disabled.
Wake up hour	Select 0-23, for example, enter 3 for 3AM and 15 for 3PM.
	Default value is 0.
Wake up minute	0-59. Default value is 0.
Wake up second	0-59. Default value is 0.
Wake system with	Enable or disable system wake on alarm event. When enabled, system
Dynamic time	wakes on the current time + Increase minute(s). Default value is
	Disabled.
Wake up minute increase	1-5. Default value is 1.

Table 5-8 CPU Configuration

Field

Description

	Processor Type
	EMT64	EMT64
	Processor Speed	Processor speed
	System Bus Speed	System bus speed
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)			77