Safety Notes

zInstall the system safely. Make sure that cables and cords are out of the way.

zMake sure that the set-up is comfortable for users.

Product Damage

Using wire sizes that are not sufficient for your environment may result in cable damage. Always check with your local building authorities for wire sizing requirements for your environment and make sure that the installation complies with the 1993 National Electric Code (NEC) and other applicable codes.

Make sure to connect the ground wire to a reliable earth ground connection to comply with Class 1 Equipment requirements.

Damage of the Product and Additional Devices and Modules

Incorrect installation or removal of additional devices or modules damages the product or the additional devices or modules.

Before installing or removing additional devices or modules, read the respective documentation and use appropriate tools.

System Damage

Attaching power inputs to non-TNV/SELV approved power sources causes the system to fail compliance with safety regulations.

Make sure to attach power inputs to approved Telephone Network Voltage (TNV) or Safety Extra Low Voltage (SELV) branch circuits only.

Personal Injury or Product Damage

The product is supplied by a TNV-2 voltage. This voltage is considered hazardous. Make sure that the external power supply meets the relevant safety standards.

Make sure that TNV-2 is separated from dangerous voltages (mains) through double or reinforced insulation.

112

MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)

Page 112
Image 112
Emerson MITX-440-DVI-2E, MITX-430 manual Safety Notes