Emerson MITX-440-DVI-2E, MITX-430 manual USB Configuration, Ehci Hand-off

Operation

Table 5-10 IGD-LCD Control (continued)

Field	Description
LCD Mode	Set LCD Mode as PWM Mode or DC Mode.
	Default value is PWM Mode.

Table 5-11 USB Configuration

Field	Description
USB Devices	List of the USB devices attached.
Legacy USB Support	Enables Legacy USB support. AUTO option disables legacy support if no
	USB devices are connected. DISABLE option keeps USB devices available
	only for EFI applications. Default value is Enabled.
EHCI Hand-off	This is a workaround for OSs without EHCI hand-off support. The EHCI
	ownership change should be claimed by EHCI driver. Default value is
	Enabled.
Device Reset Timeout	USB mass storage device Start Unit command timeout. The options are:
	z	10 sec
	z	20 sec
	z	30 sec
	z	40 sec
	Default value is 20 sec.
Controller Timeout	The time out value for control, bulk, and interrupt transfer. The options
	are:
	z	1sec
	z	5 sec
	z	10 sec
	z	20 sec
	z	30 sec
	Default value is 20 sec.

80 MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)