Emerson MITX-430, MITX-440-DVI-2E manual Operation

Operation

Table 5-35 DXE Status Codes (continued)

	Status Code	Description
	0x78	ACPI module initialization.
	0x79	CSM initialization.
	0x7A	Reserved for future AMI DXE codes.
	0x80	OEM DXE initialization codes.
	0x90	Boot Device Selection (BDS) phase is started.
	0x91	Driver connecting is started.
	0x92	PCI Bus initialization is started.
	0x93	PCI Bus hot plug controller initialization.
	0x94	PCI Bus enumeration.
	0x95	PCI Bus request resources.
	0x96	PCI Bus assign resources.
	0x97	Console output devices connect.
	0x98	Console input devices connect.
	0x99	Super IO Initialization.
	0x9A	USB initialization is started.
	0x9B	USB reset.
	0x9C	USB detect.
	0x9D	USB enable.
	0x9E	Reserved for future AMI codes.
	0xA0	Reserved for ASL. See Table 5-38 on page 102.
	0xA1	IDE initialization is started.
	0xA2	IDE reset.
	0xA3	IDE detect.
	0xA4	IDE enable.
	0xA5	SCSI initialization is started.
	0xA6	SCSI reset.
	0xA7	SCSI detect.
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)			99