Emerson MITX-440-DVI-2E manual System Memory, Ethernet Interfaces, PCI-E Port, I2C Device Address

Functional Description

I2C device address is given in the table below:

Table 4-1 I2C Device Address

Device	CK505*	SPD0	SPD1	EMC2103*	PCA9557	82574L	W83627UHG
Address	D2	A0	A2	5C	30	C2	5A

4.4System Memory

The Pineview-D integrates a single channel 64bit non ECC DDR2 controller.

There are two 200pin SO-DIMM slots on MITX-430/MITX-440-DVI-2E, and supports up to 4GB (assuming 2Gb density device technology) DDR2 memory at data transfer rate of 667MT/s.

4.5Ethernet Interfaces

The MITX-430/MITX-440-DVI-2E provides two 10/100/1000 Ethernet, WG82567V and

WG82574L.

The WG82567V MAC is integrated in ICH8-M and uses WG82567V as GBE PHY. The connection interface is GLCI between ICH8-M and WG82567V, and it occupies the PCIE port 6.

The WG82574L is a MAC and PHY GBE solution. The connection interface for WG82574L is PCIE port 3.

4.6PCI-E Port

There are total six PCI-E ports in ICH8-M, and Table 4-2shows the PCI-E ports configuration.

Table 4-2 PCI-E Port

Port

1

2

3

Configuration

Connects to PCIEx1 slot

Connects to Mini PCIE slot

Connects to WG82574L

60 MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B)