| 5: Commands and Levels |
|
|
| |
| connections to other devices. | |
default reconnect time | Restores the default reconnect time value for connect | |
| mode tunneling. | |
default start character | Defaults the connect mode start character. | |
email connect <number> | Sets an email profile to use to send an email alert upon | |
| establishing | |
| a connect mode tunnel. | |
| <number> = the number of the email profile to use. | |
email disconnect <number> | Sets an email profile to use to send an email alert upon | |
| closing | |
| a connect mode tunnel. | |
| <number> = the number of the email profile to use. | |
exit | Returns to the tunnel level. | |
flush serial disable | Characters already in the serial data buffer are retained | |
| upon establishing | |
| a connect mode tunneling connection. | |
flush serial enable | Flushes the serial data buffer upon establishing a connect | |
| mode tunneling | |
| connection. | |
flush start character disable | Enables forwarding of the connect start character into the | |
| network. | |
flush start character enable | Disables forwarding of the connect start character into the | |
| network. | |
host <instance> | Enters the next lower level. | |
| Specify the instance for the next lower level. | |
host mode sequential | Connects to the first host in the list that accepts the con- | |
| nection. | |
host mode simultaneous | Selects simultaneous connections to all hosts on the host | |
| list. | |
kill connection | Disconnects the active connect mode tunneling connection | |
| or connections. | |
local port <number> | Sets a specific port for use as the local port. | |
| <number> = the number of the port to use. | |
no email connect | Discontinues sending email alerts upon establishing a | |
| connect mode tunnel. | |
no email disconnect | Discontinues sending email alerts upon closing a connect | |
| mode tunnel. | |
promote host <number> | Promotes the identified host, exchanging it place with the | |
| host above it, | |
| to adjust the order of the defined hosts. | |
reconnect time <milliseconds> | Sets the reconnect time value for tunneling connections | |
| established by the | |
| device in milliseconds. | |
| <milliseconds> = timeout in milliseconds. | |
show | Displays the current configuration. | |
show history | Displays the last 20 commands entered during the current | |
| CLI session. | |
show status | Displays tunnel connect status. | |
start character <control> | Sets the connect mode start character. | |
| The character may be input as text, control, decimal, or | |
| hex. | |
| A control character has the form <control>C. | |
| A decimal value character has the form \99. | |
| A hex value character has the form 0xFF. | |
XPort Pro Command Reference | 54 |
