| 5: Commands and Levels |
|
|
host <number> | Change to config host level |
name <text> | Sets the name of the host. |
| <text> = name of the host. |
no name | Clears the name of the host. |
no remote address | Clears the remote address of the host. |
no ssh username | Clears the SSH username associated with the host. |
protocol ssh | Sets the protocol to SSH. |
protocol telnet | Sets the protocol to Telnet. |
remote address <text> | Sets the IP address of the remote host to connect to when |
| this host is |
| selected on the login connect menu. |
| <text> = IP address. |
remote port <number> | Sets the remote port used to connect to the host. |
| <number> = port to be used. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
ssh username <text> | Sets the username for logging into the host via SSH. |
| <text> = username. |
write | Stores the current configuration in permanent memory. |
host 13 |
|
address <text> | Sets the remote host to establish tunneling connections |
| with. |
| <text> = IP address or host name of the remote host. |
aes decrypt key <hexadecimal> | Sets the connect tunnel AES decrypt key with up to 16 |
| bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punc- |
| tuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains |
| spaces. |
aes decrypt key text <text> | Sets the connect tunnel AES decrypt key with up to 16 |
| bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains |
| spaces. |
aes encrypt key <hexadecimal> | Sets the connect tunnel AES encrypt key with up to 16 |
| bytes. |
| Each byte is represented by two adjacent hex digits. |
| Bytes may run together or be separated by optional punc- |
| tuation: |
| 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc |
| Note that quotes must enclose the value if it contains |
| spaces. |
aes encrypt key text <text> | Sets the connect tunnel AES encrypt key with up to 16 |
| bytes. |
| Each byte is represented by a single character. |
| Note that quotes must enclose the value if it contains |
| spaces. |
auto show statistics | show connection statistics |
clrscrn | Clears the screen. |
default protocol | Restores the default protocol as "TCP". |
default tcp keep alive | Restores the default 45 second connect mode TCP keep |
XPort Pro Command Reference | 74 |
