5: Commands and Levels

 

 

auto show tlog

Continuously displays the internal trouble log.

auto show upload

Continuously displays the status of firmware upload.

clrscrn

Clears the screen.

default long name

Restores the default product long name.

default short name

Restores the default product short name.

dhrystone

Runs the Dhrystone benchmark program.

exit

Exit to the enable level.

long name <name>

Sets the product long name, displayed in command mode

 

and the Web interface.

short name <name>

Sets the product short name, displayed in command mode

 

and the Web interface.

 

<name> = maximum of eight characters.

show

Show system information

show buffer pool

Displays information about the various buffer pools.

show codefile memory

Displays memory utilization by code files.

show debug

Displays debug information.

show delta memory

Displays differences in memory utilization by code files or

 

line reference.

show hardware information

Displays information about the hardware.

show history

Displays the last 20 commands entered during the current

 

CLI session.

show linereference memory <code filename>

Displays memory utilization by line reference for one code

 

file.

show memory

Displays current memory usage information.

show task memory

Displays task memory utilization.

show task state

Displays current task states.

show tlog

Displays the internal trouble log.

show upload

Displays the status of firmware upload.

show xport_pro

Show system information

write

Stores the current configuration in permanent memory.

diagnostics (config-diagnostics) level commands

 

clrscrn

Clears the screen.

exit

Returns to the config level.

log

Enters the next lower level.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current

 

CLI session.

write

Stores the current configuration in permanent memory.

disconnect (tunnel-disconnect:1) level commands

 

clrscrn

Clears the screen.

exit

Returns to the tunnel level.

flush serial disable

Does not flush serial data upon closing a tunneling con-

 

nection.

flush serial enable

Flushes serial data buffer when a tunneling connection is

 

closed.

flush stop character disable

Forwards the stop character from the Line to the network.

flush stop character enable

Prevents the stop character from the Line from being for-

 

warded to the network.

XPort Pro Command Reference

58

Page 58
Image 58
Lantronix 900-558 manual Diagnostics config-diagnostics level commands, Disconnect tunnel-disconnect1 level commands