5: Commands and Levels

tftp get binary <source file> <destination file> <host>

Get a binary file using TFTP

tftp get binary <source file> <destination

Get a binary file using TFTP

file> <host> <port>

 

tftp put ascii <source file> <destination file> <host>

Put an ascii file using TFTP

tftp put ascii <source file> <destination file> <host> <port>

Put an ascii file using TFTP

tftp put binary <source file> <destination file> <host>

Put a binary file using TFTP

tftp put binary <source file> <destination

Put a binary file using TFTP

file> <host> <port>

 

touch <file>

Create a file

ftp (config-ftp) level commands

 

admin password <text>

Sets the administrative password for the FTP server.

 

<text> = administrative password.

admin username <text>

Sets the administrative username for the FTP server.

 

<text> = administrative username.

 

It also removes the administrative password.

clear counters

Zeros FTP counters.

clrscrn

Clears the screen.

default admin username

Resets the FTP username to the default (admin).

exit

Returns to the config level.

no admin password

Removes the FTP administrative password.

no clear counters

Unzeros FTP counters.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current

 

CLI session.

show statistics

Displays the FTP statistics.

state disable

Disables the FTP server.

state enable

Enables the FTP server.

write

Stores the current configuration in permanent memory.

host 1 (tunnel-connect-host:1:1) level commands

 

address <text>

Sets the remote host to establish tunneling connections

 

with.

 

<text> = IP address or host name of the remote host.

aes decrypt key <hexadecimal>

Sets the connect tunnel AES decrypt key with up to 16

 

bytes.

 

Each byte is represented by two adjacent hex digits.

 

Bytes may run together or be separated by optional punc-

 

tuation:

 

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

 

Note that quotes must enclose the value if it contains

 

spaces.

aes decrypt key text <text>

Sets the connect tunnel AES decrypt key with up to 16

 

bytes.

 

Each byte is represented by a single character.

 

Note that quotes must enclose the value if it contains

 

spaces.

aes encrypt key <hexadecimal>

Sets the connect tunnel AES encrypt key with up to 16

 

bytes.

 

Each byte is represented by two adjacent hex digits.

 

Bytes may run together or be separated by optional punc-

 

tuation:

 

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

 

Note that quotes must enclose the value if it contains

 

spaces.

XPort Pro Command Reference

66

Page 66
Image 66
Lantronix 900-558 manual Ftp config-ftp level commands, Host 1 tunnel-connect-host11 level commands