| 5: Commands and Levels |
|
|
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
cpm (cpm) level commands |
|
add <cp> to <group> | Adds the specified CP to the specified group. |
| <cp> = configurable pin. |
| <group> = the name of the group to which you want to add |
| the CP. |
add <cp> to <group> <bit> | Adds a specified CP to a specified group at a specified bit |
| position. |
| <cp> = configurable pin. |
| <group> = the name of the group to which you want to add |
| the CP. |
| <bit> = bit position. |
clrscrn | Clears the screen. |
create <group> | Creates a configurable pin (CP) group. |
| <group> = the name for the new group. |
delete <cp> from <group> | Removes a CP from a specified group and sets the CP to |
| its default |
| configuration of input. |
| <cp> = configurable pin. |
| <group> = the name of the group. |
delete <group> | Removes a group and resets all CPs in that group to the |
| default |
| configuration of input. |
| <group> = the name of the group. |
disable <group> | Disables the specified group. |
| <group> = the name of the group. |
enable <group> | Enables a disabled group. |
| <group> = the name of the group. |
exit | Exits to the enable level. |
get <group> | Displays the value of the specified group. |
| <group> = the name of the group. |
set <cp> as input | Configures a CP as an asserted high input. |
| <cp> = configurable pin. |
set <cp> as input assert low | Configures a CP as an asserted low input. |
| <cp> = configurable pin. |
set <cp> as output | Configures a CP as an asserted high output. |
| <cp> = configurable pin. |
set <cp> as output assert low | Configures a CP as an asserted low output. |
| <cp> = configurable pin. |
set <group> <value> | Assigns a value to the specified group. |
| <group> = the name of the group. |
| <value> = numeric value to assign to the CP group. Can |
| be specified as hex |
| if prepended with “0x”. |
show <group> | Displays group information for specified group. |
| <group> = the name of the group. |
show cp | Displays configuration and group information for all CPs. |
show groups | Displays all groups defined and their state. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
device (device) level commands |
|
|
|
XPort Pro Command Reference | 57 |
