Specifications
Model: | 485DSS |
Size: | 4.8"L x 2.15"W x 0.9"H |
Power: | +11 to 16 Vdc 75mA |
RS-232 Connection: | DB-25 male (DTE configured) |
RS-485 Connection: | Terminal Blocks |
Communications: | 9600 baud, no parity, 8 data bits, 1 stop bit |
Figure 2. Top View of Circuit Board
Port Configuration
The 485DSS has a RS-485/422 port and a RS-232 port. The RS-485/422 signals are on terminal blocks. Table 1 shows you the pinouts and Figure 2 shows you the location of the terminal blocks. The RS-232 signal, in the DTE configuration, connects to a DB25 male connector. Table 2 shows you the RS-232 pinouts.
RS-485/422 Port
The RS-485 port on the 485DSS receives and transmits data to and from the RS-485 network. The RS-485 port has a balanced differential line driver and receiver. RS-485 allows up to 32 driver and receiver pairs to share a two-wire party line network. This port will operate on a 4-wire network and is compatible with RS-422 devices. Refer to B&B Electronics’ free RS-422/485 Application Note for more information. Refer to Appendix C for cable charts.
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 434-7094
