Manuals / B&B Electronics / Home Audio / Stereo System

B&B Electronics CR-25E manual Transmission, Motor, Braking Mechanism, Handcrank, Limit Switch

Models: CR-25E

1 31
Download 31 pages 54.66 Kb
Page 21
Image 21

Installation & Operations Manual

 

 

CR-25E Cable Beam Barrier

Specifications

20 of 31

The main arm shaft will be mounted in heavy duty ball bearings. The main arm shaft will be not less than 2 inches in diameter. Shaft material will be ASTM A311 Class B high strength, stressproof steel.

TRANSMISSION

The transmission will be a fully enclosed, all gear, direct drive unit running in an oil bath. The drive train will not use belts or chains and will be connected to the arm shaft with a connecting rod having self-aligning ball ends. The connecting rod will be constructed of ASTM A311 Class B high strength stressproof steel.

During the opening and closing cycles, the gate arm will begin with zero velocity and accelerate smoothly reaching maximum velocity at mid-stroke (45 degrees). The arm will then decelerate smoothly to zero velocity at full stroke (90 degrees) preventing bounce or whip of the arm. Standard operating time to open or close the gate will be 13 seconds. Consult the factory for other available speeds.

MOTOR

A 110V, 1/2HP Single Phase motor will be supplied. The motor will be of the flange mounted type, attached to the transmission case with not less than four bolts. The motor will be of the instant reversing type to permit reversing movement of the arms at any point of travel. Motor data will appear in the manual.

BRAKING MECHANISM

A solenoid release, automatic motor brake will be furnished as part of the gate drive mechanism. The brake will automatically release when the handcrank is inserted to manually operate the gate.

HANDCRANK

A handcrank and drill crank will be included with each gate to operate the gate during power failure. An automatic safety disconnect switch will automatically break the control circuit power when the handcrank is inserted to allow for manual operation.

LIMIT SWITCH

The gate limit switch will be a unit assembly containing eight individual switches having one set of normally open and one set of normally closed contacts each. Contacts will be totally enclosed and will have U.L. rating of not less than 15 amperes at 220 volts AC. Limit switch will be readily accessible and easily replaced with normal hand tools. Each individual switch will be controlled by an independent cam, which will be adjustable with a hex socket cap screw. The limit switch body, shafts and cams will be of corrosion resistant non-ferrous materials.

© 2007 B&B ARMR

WWW.BB-ARMR.COM

(800) 367-0387

Page 20 Page 22
Page 21
Image 21
B&B Electronics CR-25E manual Transmission, Motor, Braking Mechanism, Handcrank, Limit Switch
Page 20 Page 22

CR-25E specifications

B&B Electronics CR-25E is a robust and versatile device designed for fulfilling the needs of industrial communication systems. Characterized by its reliability and advanced functionality, the CR-25E is widely recognized in the automation and control sectors.

One of the key features of the CR-25E is its high-speed data transmission capabilities. With support for both RS-232 and RS-485 communication protocols, the device ensures seamless integration across various systems. The CR-25E operates at speeds up to 115.2 Kbps, allowing for rapid data exchange, which is crucial in applications like robotic controls, sensors, and monitoring systems.

Another standout characteristic of the CR-25E is its built-in isolation features. With 2.5 kV isolation on the serial lines, it protects the connected equipment from voltage spikes and noise, significantly enhancing the reliability of the communication link. This isolation effectiveness is particularly valuable in environments rife with electrical interference, as it ensures stable operation and long-lasting performance.

The CR-25E supports multiple power input options, including AC and DC power supplies. This flexibility enables easy integration into existing systems without the need for extensive modifications or additional components. The device also features wide input voltage ranges, thus accommodating different industrial environments and requirements.

In terms of mounting options, the CR-25E is designed with user-friendliness in mind. The compact design and DIN rail compatibility facilitate easy installation in control panels, maximizing space efficiency while maintaining accessible connectivity for maintenance or troubleshooting.

For monitoring and configuration, the CR-25E integrates effortlessly with various industrial software and applications. The device features diagnostic LEDs to provide real-time indications of operational status, simplifying troubleshooting by allowing users to quickly identify issues.

In summary, B&B Electronics CR-25E stands out due to its high-speed data transmission, robust isolation features, versatile power input capabilities, and user-friendly design. These attributes make it a preferred choice among engineers and technicians in the field of industrial communication, ensuring that systems remain efficient, reliable, and effective in demanding operational settings.