DE10 HF Drivers
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
40 W continuous program power capacity
1” horn throat diameter
25 mm (1 in) aluminium voice coil
Mylar diaphragm
1500 – 18000 Hz response
107 dB sensitivity
Specifications
Throat Diameter (1) 25 mm (1 in)
Nominal Impedance 8 ohm
Minimum Impedance 6.3 ohm
Nominal Power Handling (2) 20 W
Continuous Power Handling (3) 40 W
Sensitivity (1W/1m) (4) 107 dB
Frequency Range 1.5 -18 kHz
Recommended Crossover (5) 2.5 kHz
Voice Coil Diameter 25 mm (1 in)
Winding Material Aluminium
Inductance 0.1 mH
Diaphragm Material Mylar
Flux Density 1.55 T
Mounting and Shipping Info
Two M5 holes 180° on 76 mm (3
in) diameter
Overall Diameter 90 mm (3.5 in)
Depth 53 mm (2.1 in)
Net Weight (1 unit) 0.8 kg (1.8 lb)
Shipping Weight (8 units) 6.7 kg (14.7 lb)
Shipping Box (8 units) 220x220x150 mm
(8.7x8.7x5.9 in)
1Driver mounted on B&C ME10 horn
22 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
512 dB/oct. or higher slope high-pass filter.