WG800 Line Array Source
Line Array optimized Waveguide Max. horizontal coverage 120° 220 W continuous program power capacity 75 mm (3 in) aluminium voice coil
Composite Polyimide/Titanium diaphragm 500 – 17000 Hz response 108 dB sensitivity
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
Specifications
Horizontal Coverage | 120° max |
Active Radiating Factor | 93.7 % |
Recommended Crossover (1) | 0.8 kHz |
Waveguide Material | Cast Aluminium |
Nominal Impedance | 8 ohm |
Minimum Impedance | 8.6 ohm |
Nominal Power Handling (2) | 110 W |
Continuous Power Handling (3) | 220 W |
Sensitivity (1W/1m) (4) | 108 dB |
Frequency Range (5) | 0.5 |
Voice Coil Diameter | 75 mm (3 in) |
Winding Material | Aluminium |
Diaphragm Material | Composite |
| Polyimide/Titanium |
Flux Density | 1.85 T |
| |
Mounting and Shipping Info | |
|
|
Waveguide Baffle Cutout | 153x25 mm (6x1 in) |
Driver diameter | 124 mm (4.9 in) |
Dimensions | 163x130x235 mm |
| (6.4x5.1x9.3 in) |
Net Weight | 3.3 kg (7.3 lb) |
Shipping Weight | 3.4 kg (7.5 lb) |
Shipping Box | 245x140x175 mm |
| (9.6x5.5x6.9 in) |
112 dB/oct. or higher slope
22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
5Waveguide mounted on 90°x10° bell horn
