Securing Hitch to Bicycle
If your rear wheel bicycle has a lock nut, please follow instructions on page 4.
Rear Wheel With Quick Release Skewer (Use only a standard Chromoly steel skewer. Trailer mounting bracket is not designed for use with lightweight or speciality skewers.)
Adaptor
Hitch
1Remove the quick release skewer from bicycle’s rear wheel hub.
2Insert skewer through adaptor and mounting hole in the hitch.
You will find the adaptor secured to the hitch.
3 Secure hitch and adapter |
piece using the quick |
release skewer to bicycle’s |
rear wheel and tighten |
skewer by securing the nut |
on the opposite side until |
finger tight. You will need |
IMPORTANT: We strongly recommend that the bicycle on which the trailer will be attached, undergo a safety check by a qualified bicycle mechanic before attaching the trailer.
to hold the hitch in place |
to prevent it from moving. |
Continue on page 6
Warning: FAILURE TO PROPERLY TIGHTEN BICYCLE’S QUICK RELEASE SKEWER COULD CAUSE HITCH FAILURE AND WHEEL LOSS RESULTING IN A SERIOUS INJURY OR DEATH.
