WARNING: Do not place hot liquids in the parent tray. Hot liquids can burn your child. Do not place more than 3 pounds in the tray as it may cause a hazardous unstable condition to exist.

Your stroller is now ready to use

BRAKES

WARNING:Always set brakes when the stroller is not being pushed so that the stroller will not roll away. Never leave stroller unattended on a hill or incline as the stroller may slide down the hill.

To engage brakes, apply light downward pressure to the brake lever located on each rear wheel. The stroller may require slight forward or rearward movement

in order to line up the teeth on the brake with the each wheel brake cluster. See figure 5. Check that the stroller will not move and that the brakes are properly applied. To release, gently lift up on the brake lever. See figure 6.

TO FOLD STROLLER:

Do Not allow children near stroller while folding.

• The front section of the frame may be folded back to reduce the folded size of the stroller. To fold the front frame, slide the plastic fittings forward while lifting upward on the frame. Rotate the front frame backwards to rest on the rear portion of the frame. Please see figure 7a and 7b.

• Lift upward on the secondary safety lock on the left side of the stroller just above the rear wheel. Please see figure 8. Lift upward on the spring loaded automatic latch on the right side of the stroller just above the wheel while pushing forward on the handle. Please see figure 9. Once the stroller begins to fold, release the latch and pull upward on the front of the stroller until the stroller is folded. Please see figure 10. Secure the stroller in the folded position by latching the fold latch, located on the right side of the stroller handle, over the extended rivet on the front leg. Please see figure 11.

TO UNFOLD STROLLER:

Do Not allow children near stroller while unfolding.

• Release the folding latch, which is located on the right side. See figure 11.

• Lift up on the stroller handle with both hands until the stroller frame is erect and locked in the open position. See figure 10. The stroller has a spring-loaded latch on the right side of the frame. Test that latch is fully engaged. Engage the manual secondary safety lock on the left side of the frame prior to placing your car seats on the stroller. See figure 8.

• Extend the front frame by rotating it forward. See figure 7b. Check that the two plastic fittings both latch onto the front upper tube of the stroller frame. See figure 7a.

Fig. 11

Fig. 7a

Fig. 7b

Fig. 8

Fig. 9

Fig. 10

4

Page 4
Image 4
Baby Trend 1304TW manual To Fold Stroller