Baby Trend 1304TW manual Installation Instructions for Baby Trend Latch-Loc

Installation Instructions for Baby Trend® Latch-Loc®

The Double Snap-N-Go®will accommodate the Latch-Loc®Infant Car Seat. Please follow the following instructions for proper installation of the Latch Loc.

Front Seat:

1.Remove (unscrew) Crossbars A1, B1, and C and D from the Double Snap-N-Go®frame Remove the Car Seat Straps from the Double Snap-N- Go® frame. Retain the screws you remove.

2.Attach the Car Seat Straps to the Double Snap-N-Go®frame using the two holes labeled #5 as shown in figure 1. Use the two screws that you removed in step 1.

3.Attach Crossbar C, to the Double Snap-N-Go®frame using the two holes labeled #7 as shown in figure 1.

Rear Seat:

1.Remove (unscrew) Crossbars A 2, B2 and B1 from the Double Snap-N- Go® frame. See figure 2.

Insertion of the Latch-Loc®Infant Car Seat

1.With one hand grasp the car seat handle (in its upright, carrying position) and gently place the seat, so that the baby faces the rear of the Double Snap-N-Go®, onto the Double Snap-N-Go®so that the large groove on the seat bottom, nearest the head-end of the seat, hooks over Crossbar BT1 in the front or crossbar BT2 in the rear. Check that the seat locked onto the Crossbar. See Figure 3. FOR SAFE OPERATION, IT IS VERY

IMPORTANT THAT THE SEAT LOCK SECURELY ONTO THE CROSSBAR.

2.Feed the Car Seat Straps through the auto belt slots on the infant car seat as shown in Figure 4 and snap the two buckles together. The first time your do this, you will need to adjust the length of the strap for a tight fit around the car seat. FOR SAFE OPERATION, IT IS

VERY IMPORTANT THAT THE CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED OVER THE CAR SEAT.

3.Test for secure installation by moving the car seat in all directions. The car seat should be securely attached to the Double Snap-N-Go®.

Removal of the Latch-Loc®Infant Car Seat:

1.Unlock the Car Seat Strap and remove from over the infant car seat.

2.With one hand, grasp the car seat handle (in its upright, carrying position) and with your other hand squeeze the handle on the front of the car seat and lift the car seat upward from the Double Snap-N-Go®frame. See Figure 5.

Baby Trend® and Latch-Locare the trademarks of their owners. They are not associated with Baby Trend and no approval or endorsement is implied.

Hole #7
	Hole #5
Bar C	Strap	BT1
	Fig. 1

Hole #5

BT2

Strap

Fig. 2

Fig. 3

Fig. 4

Fig. 5 14