PARTS
Base | Parent Tray | Child Tray | Locking Cap |
|
|
| |
|
| Rear Wheels |
|
| Rear Axle Assembly | Hub Cap | |
|
| ||
Car Seat | Stroller | Front Wheels | Solid Cap |
| |||
TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE
INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
TO ASSEMBLE STROLLER
*Remove stroller from box. The front wheels, rear wheels, and child tray, and parent tray need to be installed prior to use.
*To attach the front wheels, slide the red unlock mechanism and squeeze the stroller handle while pulling backward on the stroller to unfold. See figures 1 and 2.
*Lean the stroller backwards so that it rests on the handle and rear frame tubes and the front wheel tubes are pointing upward. Position the front wheel assembly at the front tube such that the hole in the swivel assembly will slide onto the front tube. Please see figure 3. Push each front wheel assembly onto the front tube being careful that wheel assembly locks onto the front leg. Pull on the wheel assembly to ensure that it is securely attached to the stroller. Please see figure 3.
*Lean the stroller forward to rest on the front wheels. Assemble the rear wheels as follows:
1.Slide the rear axle assembly onto the rear stroller legs until they lock into place. Please see figure 4.
2.Slide each wheel onto the rear axle and secure in place with the Locking Cap. Snap the solid cap over the Locking Cap. Snap the
Hub Cap onto the wheel. Please see figure 5. Please see figure 6 for order assembly.
Pull on each wheel to ensure that each is firmly attached to the axle.
*Ensure that the wheels are firmly locked into place. Do Not use the stroller if the wheels are not locked into place, but rather contact our customer service department immediately at (800)
Figure 1. | Figure 2. |
Figure 3.
Figure 4.
Figure 6. | Figure 5. | 3 |
|
|
