ATTACHMENT OF THE BABY TREND INFANT CAR SEAT

* To attach the Baby Trend Infant Car Seat, recline the seat all the way back. (Fig. 18)

* Position the Infant Car Seat, facing toward the rear of the stroller, so that the seat shell goes into the front tray and latches into place. (Fig. 19) Check that the Infant Car Seat is firmly locked onto the front tray before using.

*Check that the front child tray is firmly attached to the stroller armrests. Make sure that the car seat locks into the front child tray. Then turn tabs on stroller frame to lock the front of the car seat into the stroller.

(Fig. 20)

* To remove the Infant Car Seat, squeeze the release handle located at theFig. 18 foot-end of the seat and carefully lift upward on the seat. (Fig. 21)

Locks

into tray

Fig. 19

Fig. 20

Fig. 21

WARNING: Failure to follow these car seat attachment instructions could result in serious injury or death.

SPEAKER IN CANOPY FOR MP3 DEVICE

*Use the input jack inside the pocket to plug in your MP3 device. (Fig. 22)

Fig. 22

6

 

Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.

Page 6
Image 6
Baby Trend 1956CT manual Attachment of the Baby Trend Infant CAR Seat, Speaker in Canopy for MP3 Device