Bahco Saw manual Non-ferrous Cutting, For horizontal machines

Non-ferrous Cutting

3850 — SANDFLEX® Dragon™

For horizontal machines

•Positive hook toothing for good penetration and chip formation.

•Tough Matrix HSS tooth tips.

•Large gullets for good chip carrying capacity.

Non-ferrous Cutting

DIMENSIONS		TEETH	TOOTH	PRODUCT
MM	INCHES	PER INCH	TYPE	CODE
20 x 0.9	3/4 x .035	3	Hook	3850-20-0.9-H-3
27 x 0.9	1 x .035	3	Hook	3850-27-0.9-H-3
Bandmill
34 x 1.1	1-1/4 x .042	1.33	PM	3850-34-1.1-P-1.33
					▼
• The PM tooth has a 10° positive rake angle and a gullet with a
large chip capacity.

•This 1.33 TPI is designed for large sections of wood in Bandmill

type machines.

▼ ▼ ▼ ▼

23

LARGE &	SMALL SOLIDS	PIPES, PROFILES,	CONTOURS
MEDIUM SOLIDS	& BUNDLES	CASTINGS