Tooth Shape guide
Metal Cutting (Evenly pitched)
The tooth shapes have different rake angles, clearance angles and gullet depths. This makes each tooth shape suitable for a specific application.
Regular is a standard tooth shape | Positive PS has a | Triple Set Xtra, with high/low, 3 tooth |
with 0˚ rake angle. Regular is the | a curved back and a gullet with large | pattern designed to give maximum chip |
traditional tooth shape for general | chip capacity. It is excellent for cutting | clearance and even chip load. This |
cutting of small, solid workpieces. | large workpieces of all types of steel. | blade with 10° rake is ideal for cutting |
|
| large difficult, abrasive materials. |
|
|
|
Metal Cutting (Variably pitched)
These tooth shapes should be used when there is a risk of vibration when cutting tubes, profiles and bundles. Generally, multi- purpose blades are variably pitched.
Tooth Shape Guide
Combo tooth shape is similar to Regular. It is suitable for
Combo PR, with a
With its advanced design and Positive PS teeth, Combo PS has optimum gullet capac- ity and is the ideal tooth shape for production cutting, especially of alloyed steels.
Combo LK is a low kerf, combo design to provide low vibration, long life and good surface finish in multi- purpose cutting applications. Available in
Carbide Triple Set Xtra, Combo
same as the standard triple set xtra, but with advantage of combo pitches to give smoother, cutting action, low vibrations.
Combo LZ is a low kerf, zero rake combo design available in 4/6 TPI. It provides a zero rake option within the
Specifically designed for difficult to cut shapes, sections, tubes and bundles.
Metal Cutting (Ground profile info)
Advanced tooth design of ground bandsaw blades will give, in combination with precise setting, superior surface finish and extended tool life.
Combo PHG is a patented ground tooth shape with positive rake angle designed for good penetration of large sections of
Combo PSG is a new ground tooth shape with positive rake angle. It is the ideal tooth shape for production cutting meduim to large sections of a wide range of materials and especially on alloyed and stainless steels.
Non-ferrous Cutting (Evenly pitched)
The tooth shapes have different rake angles, clearance angles and gullet depths. This makes each tooth shape suitable for a specific application.
Hook has sharp teeth with 10˚ rake angle and shallow gullets. It is used for cutting
Carbide Triple Set with high/low, 3 tooth pattern maximum clearance, and even chip loads. This tooth shape is ideal for
and plastics.
use on non ferrous alloys found in the foundry industry.
11
