Section 4 • Bilge & Underwater Gear

C.Impact to Stern Drive

The stern drive can be damaged by impact, either while trailering or boating. To minimize the possibility of impact damage while trailering, keep the stern drive raised to the trailering position.

The hydraulic system used to raise and lower the stern drive can cushion impact and lessen damage from head-on impacts to the stern drive from underwater objects BUT ONLY when the boat is moving forward. There is no protection if the stern drive is struck during reverse operation or from an angle when moving forward.

If you strike a submerged object, STOP THE ENGINE as soon as possible and examine the stern drive unit for damage. Even if no damage is visible, there could be internal problems or difficulty maneuvering. If you must use the boat after impact, run at the lowest speed possible.

D.Propeller Removal and Installation

!WARNING

If engine is started during propeller maintenance, serious personal injury can occur.

Shut off engine, remove key, shift into neutral, and put tape over ignition switch key slot.

a.Shut off engine, remove key, shift into neutral and put tape over ignition switch key slot.

b.Straighten the bent tabs on the propeller nut retainer (Figure 4.3.1).

Propeller

(Fig. 4.3.1)

securing tabs

c.Place a block of wood between the gear case and propeller to stop propeller from rotating and remove propeller nut (Figure 4.3.2).

Propeller

(Fig. 4.3.2)

gear case

wood block

d.Remove the propeller nut retainer, the thrust hub and the continuity washer (Figure 4.3.3) and put them in a secure place. Pull the propeller straight off the shaft. Remove the thrust washer that is behind the propeller. If the propeller is seized to the shaft and cannot be removed by hand, special tools are needed. Have the propeller removed by an authorized dealer or trained mechanic.

Propeller

 

continuity

(Fig. 4.3.3)

 

washer

 

 

 

 

propeller

 

 

thrust hub

 

 

propeller

 

 

nut

propeller

thrust

propeller

shaft

nut retainer

 

washer

 

 

e.Coat the propeller shaft with an anti-seize lubricant (Figure 4.3.4).

Propeller

(Fig. 4.3.4)

coat with anti-seize

lubricant

33 Outlaw®

4.3

Page 47
Image 47
Baja Marine 33 manual Impact to Stern Drive, Propeller Removal and Installation

33 specifications

The Baja Marine 33 is a striking testament to the legacy of performance and design in the world of powerboats. Known for its impressive speed and agility, this vessel embodies the perfect blend of luxury and functionality, making it a favorite among boating enthusiasts.

One of the standout features of the Baja Marine 33 is its sleek, aerodynamic design, which plays a crucial role in enhancing its performance on the water. With a length of 33 feet, this boat is built for stability and precision, allowing for smooth navigation even in challenging conditions. The deep-V hull design is engineered to cut through waves effortlessly, providing a thrilling and comfortable ride.

Under the helm, the Baja Marine 33 is typically powered by robust engines that deliver exceptional horsepower. Many configurations include twin engines that can produce a total output exceeding 600 horsepower, allowing for exhilarating speeds and quick acceleration. This powertrain setup is complemented by advanced marine technologies, such as precise steering systems and responsive throttle controls, which make handling the boat intuitive and enjoyable.

The interior of the Baja Marine 33 is designed with comfort and luxury in mind. Spacious cabins provide ample seating for guests, with high-quality upholstery and elegant finishes that enhance the aesthetic appeal of the boat. Additionally, the layout often includes a well-equipped galley, allowing for convenient meal preparation during extended trips.

Safety has always been a priority in Baja's engineering, and the Baja Marine 33 is no exception. It features a range of safety systems, including high-quality navigation lights, a robust bilge pump system, and well-placed handrails to ensure that passengers can move about comfortably and securely.

Versatility is another hallmark of the Baja Marine 33. Whether it’s for day cruising, water sports, or just relaxing with friends and family, this boat can accommodate a range of activities. The ample deck space provides room for sunbathing, while strategically placed storage compartments keep the essentials organized and easily accessible.

In summary, the Baja Marine 33 is a powerful blend of performance, style, and comfort. With its cutting-edge technology, spacious interior, and superior handling, it continues to be a preferred choice for both seasoned mariners and newcomers to the boating world. Whether you’re racing across the waves or enjoying a leisurely day on the water, the Baja Marine 33 promises an unforgettable experience.