inspection and maintenance

Adjusting the Throttle Cable

Make sure the throttle cable is adjusted properly. To adjust throttle cable, rotate adjustment nut located at the hand throttle.

Check if the throttle twist grip has the required free operating movement.

The required free operating movement: 2-6mm (.078 -.24in) . If the grip cannot be moved freely, turn the adjusting nut to ensure proper operating movement.

After adjustment, start the engine and check for the operating movement again. Repeat the adjustment if necessary until the desired operating movement is obtained.

Throttle cable adjust nut

Adjusting the Carburetor

Adjusting procedures of idling speed:

1.Support the vehicle by a stand.

2.Adjust the idle speed by the throttle stop screw to 1400 +200 RPM -150.

CAUTION

Do not try to correct a malfunctioning carburetor by adjusting the idling speed. If the carburetor is not functioning properly, it should be repaired by a service center.

Adjust idling speed only when the engine is warmed up or 10 minutes after operation.

15

Page 18
Image 18
Bajaj Electricals DB30 manual Adjusting the Throttle Cable, Adjusting the Carburetor