inspection and maintenance

CHECKING THE OIL

Check engine oil each time prior to operating mini bike.

The oil level should be between upper and lower lines of oil gauge.

1.Set the Mini Bike on level ground, screw off the oil gage plug, wipe the oil gage rod clean and then insert the gage plug into the crankcase again to check the oil level. There is no need to screw the oil gage plug completely in the hole to check the oil.

2.Add lubricating oil up to the edge of the fuel plug.

3.Screw oil gage plug tightly.

CAUTION

Never start the engine when there is insufficient lubricating oil. Otherwise, it will cause harm to the engine.

Oil dip stick

Lubricating Oil Recommended

The lubricating oil is an important factor affecting the performance and service life of the engine. Please refer to the chart for the correct grade of engine oil based on the environmental conditions in your area. Do not use any other type of oil other than what is recommended in the chart. DO NOT MIX OIL WITH THE GASOLINE.

.45L (.40qt) Oil

Lubricating oils of different viscosity shall be employed in different regions and at different temperatures.

 

 

 

 

20W-40

 

20W-50

 

 

MACHINE

 

 

 

 

 

 

 

 

OIL

 

 

 

15W-40

 

15W-50

 

 

 

 

 

 

 

 

 

 

 

 

 

10W-40

 

 

 

 

 

 

10W-30

 

 

 

°C

-30

-20

-10

0

10

20

30

40

TEMP.

 

 

 

 

 

 

 

 

°F

-22

-4

14

32

50

68

86

104

12

Page 15
Image 15
Bajaj Electricals DB30 manual Inspection and maintenance, Checking the OIL