HEAT AND MOISTURE (SECONDARY CONTROL): Heat and/or moisture can be further controlled by sliding damper, located at top of cabinet, left or right to desired opening.
CLEANING PROCEDURES
LEDGE REMOVAL:
Lift up and out of holes in ledge uprights.
HEATER ASSEMBLY REMOVAL:
Open door and allow sufficient time for cool down.
Unplug heater cord from receptacle.
Carefully slide heating unit forward. (If in proofing mode and pan has water remaining, avoid water movement to prevent spillage. After unit is totally out and on a stable surface, remove water pan and pour out remaining water.)
When returning heater assembly to its operating position, be sure to line up back end with bottom of louvered air tunnel. (If returning unit to proofing mode, add water only after unit is fully inserted and in operating position.)
8
