Fry Warmer | Installation |
4.Secure WB31216000 to countertop with # 8 sheet metal screws.
5.Seal WB31216000 to the countertop to conform to NSF Standard 4, Item 4.28. (Dow Corning RTV #732 Multi purpose Sealant.)
6.Feed power cord (supplied), up through holes in WB31216000.
7.Connect wires of power cord to power entry terminal block according to the wiring diagram attached to the unit or provided in the Service Manual.
8.Position main unit on WB31216000.
9.Fit pan insert to main unit by lifting the open side of pan insert over the two tabs on main unit and lower the pan insert into the opening in the WB31216000.
Countertop Collar Weldment Without Liner Pan (WB31211900)
1.Obtain a suitable countertop location for the unit.
2.Cut a hole in the countertop for the countertop collar weldment without liner pan (WB31211900) according to illustration below:
3.Using a 1/8” drill bit, drill holes in the countertop used to secure WB31211900 to the countertop.
4.Secure WB31211900 to countertop with # 8 sheet metal screws.
5.Seal WB31211900 to the countertop to conform to NSF Standard 4, Item 4.28. (Dow Corning RTV #732 Multi purpose Sealant.)
6.Feed power cord (supplied), up through holes in WB31211900.
7.Connect wires of power cord to power entry terminal block according to the wiring diagram attached to the unit or provided in the Service Manual.
8
