26
>> Set the television to switch itself on or off
Standby settings
The television can be set to switch itself
to standby after some time with no
operation. The factory setting is 4 hours.
This function only applies in video mode,
not in audio mode.
To make standby settings …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight STANDBY
SETTINGS. Press the centre button to
bring up the STANDBY SETTINGS menu
and use the navigation button up or down
to move between AUTO STANDBY and
POWER SAVING.
> Use the navigation button left or right to
select the setting you want.
> Press the centre button to store the
setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
When AUTO STANDBY is activated, a message
appears on your television screen if the
television has not been operated during the
time set in the menu. The television then
switches to standby if you do not operate it.
STANDBY SETTINGS menu
When no signal has been detected for
15 minutes, the television is switched to
standby.
If you set the POWER SAVING to ON, you
cannot activate the television or its sources
from your link room, while the main room
television is in standby. Furthermore, when
POWER SAVING is set to ON you cannot
activate external PLAY TIMERs.