14
Place the wall bracket
Find the correct place for the music system, before mounting it on the wall.
Use the wall bracket and spacer as a template to mark up where to drill the holes.
Set up your music system
100 mm 4"
80 mm 3.15"
140 mm 5.5"
260 mm – 10.24"
275 mm – 10.83"
Fasten the wall bracket
Use the correct size and type of screws and wall plugs – taking into account the construction and condition of the wall. Use three screws/fasteners with a minimum load rating of 3.5 kg (8 lbs.). Insert the cables as described on the next page, before you fasten the music system.
Fasten the music system
Align and position the music system on the wall bracket, and then turn the music system gently as far as it will go.
1 |
~ 20° |
2 |
Information
Light partition walls If you intend to hang the music system on a gypsum wall (also known as drywall or wallboard), the wall bracket must be fastened to a vertical stud. Use one lag screw (5 mm – 0.2"), which penetrates the gypsum, and is screwed a minimum of 25 mm (1") into a vertical stud. For stability, use two additional screws of a type intended for gypsum walls. Mounting was evaluated for use on a drywall surface.
