Secure the cables …
1.Insert the cables (VIDEO, USB and POWER) into the corresponding sockets in the base of the music system. Note: Place a cable binder behind the USB plug (A).
2. Run the USB cable through the cable holder.
A
VIDEO | POWER |
USB
15
USB
…
3.Run the POWER cable under the USB cable and
over the VIDEO cable, and then through the cable holder.
4. Run the VIDEO cable under the USB and POWER cables, and then through the cable holder. Finally, to secure the cables, tighten the cable binder (A).
POWER
A
VIDEO
Make basic settings
Mount
For instructions on how to mount the optional CD Ripping Device together with your music system, see the instructions enclosed with the CD Ripping Device. Note that it should be mounted by
a Bang & Olufsen retailer.
Connect BeoMaster 5 to the |
| Activate a BeoSound 5 |
| Follow the |
mains supply |
| source |
| instructions |
Settings For further information about Settings, refer to the Guide on
The supplied mains cord and plug are specially designed for the product. If you change the plug or damage the mains cord, you must buy another from your Bang & Olufsen retailer.
NOTE! See the BeoMaster Guide for information about the connections.
The music system can only be switched off completely by disconnecting the BeoMaster from the mains.