JVC LYT0002-0N5A manual Picture Stabilizer, Exposure Control, Brighten Image, Darken Image

20EN

RECORDINGAdvancedFeatures(cont.)

Picture Stabilizer

This feature compensates for unstable images caused by camera-shake, particularly noticeable at high magnifica- tion.

	ACTIVATE PICTURE STABILIZER
	Press PICTURE STABILIZER. “ ” appears in the
PICTURE STABILIZER	1 LCD monitor or the viewfinder.
	•To switch off the Picture Stabilizer, press PICTURE
	STABILIZER. The indicator disappears.
	NOTES:
	● Accurate stabilization may not be possible if hand
	shake is excessive, or under the following conditions:
	• When shooting subjects with vertical or horizontal
	stripes
	• When shooting dark or dim subjects
	• When shooting subjects with excessive backlighting
	• When shooting scenes with movement in various
	directions
	• When shooting scenes with low-contrast
	backgrounds
	● Switch off Picture Stabilizer when recording with the
	camcorder on a tripod.

	+02
	LCD monitor
	or viewfinder
	Exposure Level Indicator
To brighten the image
–06	+06

To darken the image

Exposure Control

This feature automatically adjusts the iris for the best available picture quality, but you can override and make the adjustment manually.

SELECT MODE

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

BRIGHTEN IMAGE

2 Press + (maximum +06). The Exposure level indicator appears in the LCD monitor or the viewfinder.

OR . . .

DARKEN IMAGE

Press – (maximum –06). The Exposure level indicator appears in the LCD monitor or the viewfinder.

When you want to return to the factory setting . . .

RESTORE INITIAL SETTING

3 Press + and – simultaneously. The standard setting is immediately restored and the Exposure level indicator disappears.