![](/images/new-backgrounds/1316343/31634377x1.webp)
Transmitted beam |
| |
effective area |
| |
| 5m |
|
15° |
| Remote sensor |
30° |
|
|
15° | 30° |
|
|
|
When using the remote control, be sure to point it at the remote sensor. The above illustration shows the approximate transmitted beam effective area for indoor use.
The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.
Rec Time Indicator
Interval Timer Indicator
|
|
|
|
|
| Index Code |
|
| 1min | INDEX |
|
| |
|
|
|
| |||
|
| 1/2s |
|
|
| Marking |
|
|
|
|
|
|
|
LCD monitor or viewfinder
START/STOP
VISS
INT. TIME
REC TIME
| EN 39 | |
FEATURE: |
| |
PURPOSE: | The remote control lets you set/release |
|
| Interval Timer and Rec Time functions as |
|
| well as the Menu screen. |
|
OPERATION: |
|
|
| 1) Set |
|
| Instead of performing steps 1 through 3 |
|
| on pg. 28 |
|
| TIME on the remote control. Each time |
|
| INT. TIME is pressed, the Interval Timer |
|
| indicator appears, changing in the |
|
| following order: 15s, 30s, 1min, 5min |
|
| and No indication (off). |
|
| 2) Release |
|
| Instead of setting “Interval Timer” to |
|
| “OFF” in the Menu, press INT. TIME on |
|
| the remote control until the Interval |
|
| Timer indicator disappears. |
|
| Animation |
|
| 1) Set |
|
| Instead of performing steps 1 and 2 on |
|
| pg. 29 (“Animation”), press REC TIME |
|
| on the remote control. Each time REC |
|
| TIME is pressed, the Rec Time indicator |
|
| appears, changing in the following |
|
| order: 1/4s, 1/2s, 1s, 5s and No |
|
| indication (off). |
|
| 2) Release |
|
| Instead of using the Menu in step 5 on |
|
| pg. 29, press REC TIME on the remote |
|
| control until the Rec Time indicator |
|
| disappears. |
|
|
|
|
| 1) Set |
|
| Instead of performing steps 1 through 3 |
|
| on pg. 29 |
|
| TIME and REC TIME on the remote |
|
| control. Each time INT. TIME is |
|
| pressed, the Interval Timer indicator |
|
| appears, changing in the following |
|
| order: 15s, 30s, 1min, 5min and No |
|
| indication (off). Each time REC TIME is |
|
| pressed, the Rec Time indicator |
|
| appears, changing in the following |
|
| order: 1/4s, 1/2s, 1s, 5s and No |
|
| indication (off). |
|
| 2) Release |
|
| Instead of using the Menu in step 5 on |
|
| pg. 29, press INT. TIME and REC TIME |
|
| on the remote control until the |
|
| indicators disappear. |
|
NOTE: | Also refer to pgs. 28 and 29. |
|
|
|
|
FEATURE: | Index Code Marking |
|
PURPOSE: | To give you automatic access to any |
|
| selected point on a recording. |
|
OPERATION: | 1) Press VISS once to place the index |
|
| code. “INDEX” blinks in the LCD |
|
| monitor or the viewfinder during |
|
| marking. |
|
NOTE: | If VISS is pressed during |
|
| mode, the mark is placed where START/ |
|
| STOP is pressed. |
|
|
|
|