24 EN
Date display
Time display
Date/Time display
Auto Date Record mode
Date-off mode 
(No indication)
Disp.
The characters 
you have set 
using Character 
Generator
10:45:56
Date display
Time display
Date/Time display
25.12.97
25.12.97
Auto date record mode
Auto date record 
executed
25.12.97
Auto Date
Auto Date Record mode
Characters
Example of stored 
characters
I LIKE YOU k
10:45:56
RECORDING
Advanced Features (cont.)Date/Time Character Insert
This feature allows you to display date, time and
characters in the LCD monitor or the viewfinder and on a
connected colour monitor, record them manually or
automatically, and even make your own titles.
NOTE:
You should already have performed the Date/Time
Setting procedure (
Z
pg. 7). If you haven’t, do so before
continuing.

DISPLAY

SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.

SELECT DISPLAY

2
Press SEL. repeatedly until “ Disp.” appears.

CHOOSE DISPLAY MODE

3
Press SET while in Record–Standby to cycle through
the modes as shown in the illustration at left.
NOTES:
●
The selected display can be recorded.
●
If you don’t want to record the display, select Date-off
mode before shooting.
●
If you want to delete the display during shooting, press
SEL. repeatedly until “
Disp.
” appears then press SET.
●
To recall the display, press SET again.

AUTO DATE RECORD

Your camcorder automatically records the date for about
5 seconds after recording is initiated in the following
situations:
•After changing the date.
•After loading a cassette.
•After Auto Date Record mode is selected by pressing
SET.
In this mode, the date is replaced after 5 seconds with
“Auto Date”.
NOTES:
●
Setting PROGRAM AE to LOCK always engages the
Auto Date Record mode, and disables all other modes.
●
In the Auto Date Record mode, if the date changes
while you’re shooting, the date indication is recorded
for about 5 seconds from that point. It is not recorded
during any other recordings made on that day.
SET
SEL.
LCD monitor
or viewfinder
PROGRAM AE
select dial