EN 9
Grip Adjustment

EXPAND LOOP

1
Separate the Velcro strip.

INSERT HAND

2
Pass your right hand through the loop and grasp the
grip.

ADJUST STRAP LENGTH

3
Adjust so your thumb and fingers can easily operate
the Recording Start/Stop button and Power Zoom
lever. Refasten the Velcro strip.
Shoulder Strap Attachment

ATTACH STRAP

1
Following the illustration at left, thread the strap
through the top of the eyelet 1, then fold it back
and thread it through the keeper 2, and then
through the buckle 3. Repeat the procedure to
attach the other end of the strap to the other eyelet,
making sure the strap isn’t twisted.

ADJUST LENGTH

2
Adjust as shown in the illustration at left 1, then
slide both keepers snug against the eyelets to
prevent slipping 2.
Tripod Mounting

ALIGN AND TIGHTEN

1
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.

CAUTION:

When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
2
3
2
1
1
Recording Start/Stop button
Power zoom lever