NOTES:
Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.
When the focus level cannot be adjusted any farther or closer, “ ” or “ ” will blink.
RELEASE MANUAL FOCUS MODE
Release FAR or NEAR. The focus indication is replaced by the focus lock indication “ ” and the adjusted focus is locked in.
3
4 Press FAR and NEAR simultaneously. The Manual Focus mode is immediately released and the focus lock indication disappears.
Turn the PROGRAM AE select dial to any position except AUTO LOCK.
ADJUST FOCUS
To farther subject . . .
Press and hold FAR. The Manual Focus indications
“ ” appear and “ ” blinks. Go to step 3.
To nearer subject . . .
Press and hold NEAR. The Manual Focus indications
“ ” appear and “ ” blinks. Go to step 3.
LOCK FOCUS
1
2
EN 19
Manual Focus
NOTE:
You should already have made the necessary viewfinder adjustments (pg. 6). If you haven’t, do so before continuing.
SELECT MODE

FAR NEAR

Power zoom lever

PROGRAM AE select dial

Page 19
Image 19
JVC LYT0002-0N5A manual FAR Near, Power zoom lever Program AE select dial