Baracoda All in One Printer manual Bluetooth commands, 0x5E

Data Capture

for Workforce

in Motion

3.6. Bluetooth commands

Command ID	0x5E
Description	Bluetooth Commands
Length	Variable (1-255)
payload	{Code ID} {length} “Parameters”
Response	If the device responds: {Code ID} {length}
	“Response”
	Else: {0}

Bluetooth specific commands from the Bluetooth communication protocol are to be framed within the payload of this message. See Appendix A for more details.

The default Bluetooth settings are the BT module’s default settings, excepted the BT name which default value must be handled by the firmware:

ToughRunners : “ToughRunners xx xx”

Scanwear : “ScanWear xx xx”

xxxx being the 4 last readable characters of the BDA written in hexadecimal (two last bytes of BDA).

Example : “Get PIN Code”

Command :

Ba) 0x02	: STX
Bb) 0x00	: Frame number
Bc) 0x01	: Number of commands (or number of commands responses)
Bd)	: Command
	Bd1) 0x5E : Command ID
	Bd2) 0x03 : Data length
	Bd3)	: Data

Bd31) 0x07	: Get PIN Code
Bd32) 0x00	: Length MSB
Bd33) 0x00	: Length LSB

e

Be) 0x69 : CheckSum = ( ∑ Bi ) mod 256

i =b

Bf) 0x03 : ETX

Response:

Ba) 0x02	: STX
Bb) 0x00	: Frame number
Bc) 0x01	: Number of commands (or number of commands responses)
Bd)	: Command
	Bd1) 0x5E : Command ID
	Bd2) 0x07 : Data length
	Bd3)	: Data
	Bd31) 0x07		: Get PIN Code

ToughRunners / ScanWear – Communication Protocol v1.2 - 12 -