Baracoda All in One Printer

ToughRunners / ScanWear – Communication Protocol v1.2 - 14 -

Data Capture

for Workforce

in Motion

------01 : Simple scan

------10 : Start Multiscan Session

---1---- : Stop Multiscan Session

D = long press duration x 100ms

E = maximum scans in session:

-0000000 : unlimited

-XXXXXXX : number of scans in the session

1------- : Anti-doubloon in the session

F = Inter-scan interval x100ms

G = 0

H = 0

I = 0

Default settings :

ScanWear : 0x00 0x01 0x01 0x0A 0x00 0x0A 0x00 0x00 0x00

ToughRunners :0x01 0x01 0x01 0x0A 0x00 0x0A 0x00 0x00 0x00

Contents

Main ToughRunners / ScanWear Communication Protocol Baracoda May 2009 SUMMARY Revision History Data Capture for Workforce in Motion 1. Introduction: generic packet format Data Capture for Workforce in Motion 2. Command ID summary Page Page Data Capture for Workforce in Motion 3. Command details 3.1. Setting mode 3.2. Operational statistics 3.3. Wrist motion detection level 3.4. Restore default settings 3.5. MMI settings Page 3.6. Bluetooth commands 3.7. Reading and triggering commands Page Page Page 3.8. Decoder commands Page 3.9. Data format commands Page Page Page Page 3.10. Communication commands 3.11. Power saving commands Page Data Capture for Workforce in Motion 4. Special packets 4.1. Deprecated packets 4.2. Acknowledgment packets 4.3. Special scanner to host messages 4.4. Special host to scanner messages Data Capture for Workforce in Motion 5. Appendix A: Bluetooth Protocol. 5.1. The configuration frames are as follows: 5.2. Commands: Page Page Page Page Page Page Page Page ToughRunners / ScanWear Communication Protocol v1.2 - 38 - Data Capture for Workforce in Motion 6. Appendix B: Decoder Protocol. This section describes in detail the 20 bytes of the response/payload of the 0x80/0x81. Remark: The EAN128 is encoded with code128 symbology.