![SKIMMER](/images/new-backgrounds/100002/10000213x1.webp)
1. Begin by removing your vacuum plate (if you have one) and skimmer basket from the skimmer.
2. Slide the hose protector net on the male end of the hose and attach the hose connector to the same end.
3. Fill the hose with water by placing the end over a return jet inlet.
SKIMMER
BASKET
VACUUM
PLATE
HOSE
HOSE HOSE
PROTECTOR CONNECTOR NET
IMPORTANT
Your hose is now free of air. Please ensure that the hose ends are kept under water while performing the following steps. This will prevent air from entering your system.
7